9. Service Mode
Start Up
1. Push the cursor key ↑or ↓to highlight Preset Input Balance.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-34
2. Press ENTER to select.
The following warning will be displayed :
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu9-35
Preset inputbalance is reserved to qualified service personnel. Ifyou are not qualified, press EX IT tocancel the paneladjust-
ments.
9.14 Advanced Processing
Overview
• Minimum Delay
9.14.1 Minimum Delay
Purpose
Innormal mode, the processing (scaling and de-interlacing) in DLP projectors introduces a few frames delay (fro m input to screen).
Settingthe option Minimum Delay to "ON" disablesall scaling and de-interlacing in the processing and reduces frame delay of the
projector(from input to screen) to ONE frame, caused by the forma tter board (DLP technology restriction). The intended use of this
optionis to apply native and progressive data to the projector and displaying it with minimum delay, using the full resolution of the
projector. Other formats will be displayed either unscaled and/or interlaced.
Thisfeature can be used if additional delay in the projector is not acceptable. Forinstance if a projector is showing the DVI loop out
of another DLP or if an external scaler/de-interlacerdoe sth e processing.
How to toggle
1. Push the cursor key ↑or ↓to highlight Advanced Processing.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-36
2. Press ENTER to select.
R5976654 SLMR12+ 27/01/2005 125