4. Connections
OUTIN
On
R9840450
HD SDI DIGITAL MODULE
OUT IN
On
9840110
SDI DIGITAL INPUT
COMM PORT TRIGGER OUT
RS232/422 OUT
RS232/422 IN
IR-ReceiverDiagnostic Code
Green Operation
Red Stand-by
IRSync OK
Hardwired
remote
CTRL 1
Hardwired
remote
CTRL 2
Two way
hardwired
remote
CTRL 3
On On
OnOn
DIGITAL VIDEO SOURCE
Digital
Video
DVI INPUT
DVI INPUT DVI OUTPUT
High Bandwidth 5 CABLE INPUT
High Bandwidth 5 CABLE INPUT
RGB
H/C V
RGB
H/C V
Image4-6
Note: The input is always 75 Ωterminated.
2. If loop through is needed, use the OUT to connect to the next device.
How to select the digital input?
1. Key in the corresponding slot number on the RCU or the local keypad.
Whena RCVDS05 is c onnected to the projector,the SDI input is available by keying in83 or 84 on the RCU.
4.5.7 Digital Video Decoder Input
What can be connected to this input?
The following source types can be connected:
•S-Video
• Component Video
• Composite Video
Which signal can be connected to the Digital VideoDecoder module?
Connector name/
Input signal
Pb Y/Vid Pr S-Video
ComponentVideo B-Y Ys R-Y -
CompositeVideo -Video - -
S-Video ---S-Video
How to connect?
1. Connect the output ofyour source to the corresponding inputs on the Digital Video Decoder module.
40 R5976654 SLM R12+ 27/01/2005