7. Random Access Adjustment Mode
Start up
1. Push the cursor key ↑or ↓to highlight Random Access .
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-1
2. Press ENTER.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
SCENERGIX
PIP
SAVE CHANGES
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-2
7.2 Picture Services
7.2.1 File annotation
How a file is built up
Thefile notation on a menu is built up in different parts. Letus have a look to these parts.
Takethe following notation : xxxxxxxx.eeen ppppXppppi
xxxxxxxx basename, 8 ch aracters
eee file extension
firstcharacter C : custom made file
firstcharacte r S : standard file
Thesecond and third character is used for a following number (= file
index). The file index for custom files : 00 to 63.
nsource number
ppppXpppp active pixel rating
ii or blank
i = interlaced file
blank = not interlaced
Table7-1
7.2.2 Possible file manipulations
Connecting a new source.
Beforeusing a new source, a correct file has to be installed. Theprojector’s memory contains a list of files corresponding to the most
used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When
thereis a little difference, the file can also be loaded and then edited until the source specs are reached.
62 R5976654 SLM R12+ 27/01/2005