7. Random Access Adjustment Mode
2. Press ENTER to select.
3. Push the cursor key ↑or ↓to highlight Status.
SCENERGIX
STATUS [ON]
- size -
TOP
BOTTOM
LEFT
RIGHT
- black level -
LEVEL
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-50
4. Press ENTER to toggle between ON and OFF.
ON scenergix is active
OFF scenergix is not active
7.5.5 ScenergiX overlap zone (horizontal scenergix)
Definitions
Image7-10
Scenergixset up
Overlap : number of pixels that overlap
Horizontalresolution of 1 projector : 1024for Graphics versions, 1280 for Realityversions, 1400 for SXGA projectors.
Tota l horizontalscreen resolution : [(horizontalresolution of 1 projector) x 2] minus overlap.
Horizontal Resolution source : number of active pixels of the source.
Adjustment of Active pixels (Pact)of the first projector
1. Go to File –> Edit menu of first projector.
2. Enter value for horizontal active (= Pact) as follows :
Pact= [(Horz. resolution of 1 projector)/(Totalhorz. screen resolution)] x(horz. resolution source)
3. Horizontalstart (=Pstart) remains the same.
Adjustment of Active pixels (Pact) of secondprojector
1. Go to File –> Edit menu of second projector.
2. Enter value for horizontal active (= Pact) as follows :
Pact= [(Horz. resolution of 1 projector)/(Totalhorz. screen resolution)] x(horz. resolution source)
3. Horizontal start (=Pstart) = original start + [(Horz. resolutionsource) minus (newly calculated Pact)]
86 R5976654 SLM R12+ 27/01/2005