1SECTION

Install Batteries

Install batteries when the Meter is new if needed. Replace batteries when the Meter

displays the battery symbol .

1. Press firmly on “open” arrow and slide forward in the direction of the arrow. The lid releases.

2. Place new batteries into the battery compartment with the “+” side up. Slide lid back into place, lining up with open slots, and close firmly. Test results stored in the memory are not erased when batteries are changed, but time must be reset.

NOTE: Two 3 volt (CR2032) lithium batteries are furnished with the Meter.

WARNING: Keep batteries away from children. Lithium batteries are poisonous.

If swallowed, immediately contact your physician or poison control center.

Discard batteries according to your local environmental regulations.

4