EUROLIVE B615D/B612D

Massive Power to Size Ratio

At the heart of each B615D and B612D are two high-current amplifiers with a combined maximum output of 1500 Watts. These Class-D amps are capable of driving the speakers to their maximum without damage or distortion thanks to their internal active protection circuits. Put simply, these systems will astound you with their massive punch, smooth midrange and articulate top-end.

Custom-Designed Transducers

Instant PA System

With just a single EUROLIVE D Series loudspeaker and a microphone you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, say for a larger room or audience, you can add more active loudspeakers via the convenient Link Output XLR connector.

Stereo Music System

You can even use two D Series enclosures for stereo playback of your music sound files without any additional

Page 3 of 5

hardware. Just plug the appropriate stereo “breakout” adapter into your deck's output jack and run the cables to the

1/4" inputs on each loudspeaker. Set the Level and EQ controls the same on both enclosures. Voilà, instant party!

Marvelous as Monitors

Thanks to their trapezoidal design, these cabinets can be laid on their side providing the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and power. Additional monitors can be chained together via the XLR Link Output jack on the rear panel.

Continued on next page

Let's face it; the transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we never

cut any corners here. While some of our competitors are content to buy off-the-shelf transducers and plug them into their boxes, we custom-design and build ours from scratch. We wind the voice coils, process the paper pulp into cones—and even machine our own back plates. This enables us to control the quality, and frankly to make better components, like the long- excursion 12 and 15" LF transducers and state-of-the-art 1.75" titanium-diaphragm compression drivers we load into each and every B612D/B615D.

Connecting a Microphone

XM8500 Mic

Connecting a Music Player

CD Player