B-CONTROL DEEJAY BCD3000 QUICK-START GUIDE

Turntable*

USB cable

Computer*

XM8500*

 

BCD3000

*not included

HPX4000*

Step-by-step installation

Now that you know the terminology and have all the gear you will need to produce high-quality audio podcasts, it’s about time you set up the equipment, install the software and get started.

1.Install the drivers provided on the BEHRINGER software CD when using a computer with a Windows operating system (not required for Mac OS X operating systems).

2.Connect your new BCD3000 controller interface to your computer with the included USB cable.

3.Connect 2 turntables or a single turntable and an additional sound source (for example, a CD player) to the respective RCA connectors of the BCD3000 interface. When a turntable is connected to the analog input, remember to switch to Phono.

4.Connect a microphone to the XLR Microphone input of the BCD3000 interface.

5.Connect a pair of headphones to the console’s Headphone output. Should you want to monitor the recording sessions with loudspeakers, connect the Master output to your hi-fi system or a pair of active speakers.

Version 1.0