BASS LIMITER ENHANCER BLE400
◊The BLE400 has no on/off switch. As soon as you insert the jack into the in connector, the BLE400 begins running. When not using the BLE400, remove the jack from the in connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specifications
In |
| |
Connector | 1/4" TS | |
Impedance | 500 kΩ | |
Out |
| |
Connector | 1/4" TS | |
Impedance | 1 kΩ | |
Power Supply |
| |
|
| 9 V��, 100 mA regulated |
BEHRINGER |
| |
|
|
|
| USA/Canada | 120 V~, 60 Hz |
| China/Korea | 220 V~, 50 Hz |
| U.K./Australia | 240 V~, 50 Hz |
| Europe | 230 V~, 50 Hz |
| Japan | 100 V~, 50 – 60 Hz |
Power connector | 2 mm DC jack, |
| negative center |
Battery | 9 V type 6LR61 |
Power consumption | 30 mA |
Physical/Weight |
|
Dimensions | approx. 2 1/8 x 2 3/4 x 4 4/5" |
(H x W x D) | approx. 54 x 70 x 123 mm |
Weight | approx. 0.73 lbs / 0.33 kg |
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP