7THUNDERBIRD BX108 User Manual
1.2.2Rear panel
(7) | (12) | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
制造商:MUSIC Group Macao Commercial 
Offshore Limited 中国制造
(8)(9)
Fig. 1.2: Rear panel connectors
(7)FUSE HOLDER / VOLTAGE SELECTOR. Please make sure that your local voltage matches the voltage indicated on the unit, before you attempt to connect and operate the BX108.
Blown fuses may only be replaced by fuses of the same type and rating. Some models allow for inserting the fuse holder in two different positions, in order to switch over from
(8)Use the enclosed power cord to connect the unit to the mains.
(9)The stereo 1/4" PHONES jack allows you to monitor the BX108’s audio signal with a pair of commercially available headphones. Connecting the headphones will mute the
(10)The TAPE OUT cinch connector supplies the audio signal of your BX108, for example to send it to a recording machine.
(11)The TAPE IN cinch connector allows you to connect an external signal source such as a drum computer or other machine providing audio playbacks.
(12)SERIAL NUMBER. Please take the time to have the warranty card filled out completely, and return it within 14 days after the date of purchase, so as to be entitled to benefit from our extended warranty. Or use our online registration option available on the World Wide Web at behringer.com.
2.Installation
2.1 Mains connection
The mains connection is made by using the enclosed power cord and a standard IEC receptacle. It meets all of the international safety certification requirements.
2.2 Audio connections
The input of your THUNDERBIRD BX108 is on a mono 1/4" jack,
the PHONES output on a stereo 1/4" jack. The tape inputs/outputs are on cinch connectors.
◊Please ensure that only qualified personnel install and operate the BX108. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the THUNDERBIRD BX108.