11F-CONTROL AUDIO FCA202 User Manual

2. Installation

Important Notes Concerning Installation on a PC!

◊To ensure that your FCA202 works properly, make sure you install the drivers before connecting the hardware to the computer. Otherwise, the hardware will not be correctly identified and in some circumstances will not work correctly.

◊If you have already cable-connected your interface, break the connection between the FCA202 and your computer, and then restart your system. Then, install the drivers as described in Chapter 2.2. Connect your audio interface only after you have successfully completed the installation.

2.1 System requirements

To work with the FCA202, your computer must fulfill the following minimum requirements:

PC

MAC
Intel or AMD CPU,

G4 / G5, 800 MHz or higher

1 GHz or higher

 

minimum 512 MB RAM

minimum 512 MB RAM

6-pin or 4-pin FireWire

6-pin or 4-pin FireWire
interface

interface

Windows XP SP2

Mac OS X 10.3.9 (Panther)

or higher

 

2.2 Installation under Windows XP

•Close all unnecessary programs before beginning the installation process

•Insert the driver CD. Use Windows Explorer to select the drive that contains the CD, and then start the setup file

•Follow the on-screen instructions and confirm that you want to continue with the installation until this has been completed