10MINIFEX FEX800 User Manual
5.3Footswitch connection
The MINIFEX features a jack for connecting a footswitch. Here, you can connect any standard footswitch with a 1/4" TS connector. As some footswitch models on the market have a different polarity, please be sure to use one that is appropriately wired. The correct wiring is shown in the illustration below.
¼" TS footswitch connector
strain relief clamp sleeve
tip
sleeve
pole 1/ground
tip
pole 2
The footswitch connects both poles momentarily
Fig. 5.3: Wiring of a 1/4" TS connector for footswitch connection
6. Appendix
6.1 List of effects and parameters
Effect | Effect | EDIT Parameter 1 | TAP/SELECT | TAP/SELECT | |
no. | Parameter 2 | LED | |||
|
| ||||
1 | CATHEDRAL | Reverb time | Brilliance | off/on | |
2 | CONCERT | Reverb time | Brilliance | off/on | |
3 | CLUB | Reverb time | Brilliance | off/on | |
4 | CHAMBER | Reverb time | Brilliance | off/on | |
5 | GOLD PLATE | Reverb time | Brilliance | off/on | |
6 | GATED REV | Reverb time | Brilliance | off/on | |
7 | REVERSE | Reverb time | Brilliance | off/on | |
8 | AMBIENCE | Room size | Brilliance | off/on | |
9 | DELAY | No. of repetitions | Time interval TAP | flashing | |
(BPM tempo) | |||||
|
|
|
| ||
10 | CHORUS | Intensity | Tempo TAP | flashing (tempo) | |
11 | FLANGER | Intensity | Tempo TAP | flashing (tempo) | |
12 | PHASER | Intensity | Tempo TAP | flashing (tempo) | |
13 | ROTARY | Intensity | Tempo | off/on | |
14 | PITCH SHIFT | Detune | off/on | ||
15 | DELAY+REV | Delay vs. reverb ratio | Time interval TAP | flashing | |
(BPM tempo) | |||||
|
|
|
| ||
16 | CHORUS+REV | Chorus vs. reverb ratio | Reverb time | off/on |
Table 6.1: List of effects and parameters
7. Specifications
Input
|
| Type | 1/4" TS connectors, unbalanced | |
|
| Impedance | approx. 30 kΩ | |
|
|
|
| |
Output |
| |||
|
| Type | 1/4" TRS connectors, impedance balanced | |
|
| Impedance | approx. 220 Ω | |
|
| Max. output level | +10 dBu | |
|
|
|
| |
In/Out |
| |||
|
| Type | 1/4" TS footswitch connector | |
|
|
|
| |
Digital Processing |
| |||
|
| Converters | ||
|
| Sampling rate | 48 kHz | |
|
|
|
| |
System Specifications |
| |||
|
| Frequency response | 10 Hz to 22 kHz, | |
|
| Dynamic range | 96 dB, 10 Hz to 22 kHz | |
|
| Distortion | 0,01% typ. @ 0 dBFS | |
|
| Crosstalk | ||
|
| 10 Hz to 22 kHz <86 dB @ 0 dBu, | ||
|
|
|
| |
Power Supply |
| |||
|
| Mains connection | external power supply, 9 V~, 750 mA | |
| Mains voltage |
| ||
|
|
| USA/Canada | 120 V~, 60 Hz |
|
|
| U.K./Australia | 240 V~, 50 Hz |
|
|
| China | 220 V~, 50 Hz |
|
|
| Europe | 230 V~, 50 Hz |
|
|
| Japan | 100 V~, 50 - 60 Hz |
|
| Power consumption | approx. 7.5 W | |
|
| |||
Dimensions/Weight |
| |||
|
| Dimensions (H x W x D) | approx. 1.9 x 4.7 x 9.6" | |
|
|
|
| approx. 48 x 120 x 242.6 mm |
|
| Weight | approx. 1.46 lbs / 0.66 kg | |
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.