2TUBE CONDENSER MICROPHONE T-47 User Manual

Important Safety
Instructions

Terminals marked with this symbol carry electrical current of sufficient magnitude to

constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed.

All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated

dangerous voltage inside the enclosure

-voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it

appears, alerts you to important operating and maintenance

instructions in the accompanying literature. Please read the manual.

Always keep in mind that the contained tube is a highly sensitive component.

Avoid impact and other mechanical interferences. BEHRINGER assumes no liability for any damage caused by the user.

If possible, keep a spare tube of the same type (12AX7) at hand.

The T‑47 is extremely sensitive to moisture. Both the microphone and the PSU‑T power supply

should not be used near water (for example, near a bathtub, washing machine, swimming pool,etc.). When doing voice recordings, always use the enclosed windscreen to protect the capsule from moisture.

To reduce the risk of electric shock, do not remove the top cover (or the rear section).

No user serviceable parts inside.

Do not defeat the safety purpose of the polarized or grounding-type plug. You should only connect the T‑47 to the provided power supply.

After each use, wipe the microphone down with a soft cloth and place it back

into its protective casing (included with the microphone).

Limited Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting behringer.com and read the terms and conditions of our warranty carefully.