ENGLISH
12
4.2.10 Velocity Sensitivity
The sensitivity of the UMX250 can be regulated so that the velocity of the keys has an effect on the volume level.
1)Press the ASSIGN button and keep it pressed.
2)Use the number keys to enter the keyboard velocity
(see Table 4.1).
3)Release the ASSIGN button.
4)Confirm your selection with ENTER. To discard your assignments either press the CANCEL key or the ASSIGN button again.
KEY | EFFECT ON KEY VELOCITY |
| OFF: velocity value is fixed to 110. |
| Change of key pressure has no effect on |
| volume level. |
| SOFT: key pressure is very sensitive; low |
| velocity changes create high changes in |
| volume level |
|
|
| MEDIUM: key pressure is “normal”; (very) |
| hard hit notes are (very) loud, (very) soft |
| hit notes produce (very) low volume |
|
|
| HARD: key pressure is more unsusceptible |
| compared to all other settings |
|
|
to | invalid input |
|
|
Table 4.1: Effect of RANGE definition on keyboard velocity
4.2.11 The FACTORY RESET command
Please proceed as follows to reset all UMX250 settings to their factory defaults:
1) Press the ASSIGN button and keep it pressed.
2a) Press both OCTAVE SHIFT buttons for a temporary FACTORY RESET. All currently modified control elements will be reset to their factory defaults. However, the USER- MEMORY remains as before and is not reset!
2b) Press keys (8), (9) and (0) simultaneously for a complete FACTORY RESET: Now not only the control elements of the FACTORY MEMORY but also those of the USER MEMORY will be overwritten.
3)Release the ASSIGN button. The ASSIGN LED stays on.
4)Confirm your selection with ENTER. If you do not want to RESET the unit, either press the CANCEL key or the ASSIGN button again.
|
| ||
5. Specifications |
| ||
USBCONNECTIONS |
|
| |
| Type | Type B; USB1.1 |
|
MIDICONNECTIONS |
|
| |
| Type |
| |
CONTROLELEMENTS |
|
| |
| Controller | 1 control wheel with center reset | |
|
| 1 control wheel without center reset | |
|
| 8 rotary knobs |
|
|
| 1 fader |
|
| Buttons | 12 buttons |
|
| Keyboard | 25 keys; | |
SWITCHPLUG |
|
| |
| Foot pedal | ¼" mono jack with automatic | |
|
| polarity recognition |
|
POWERSUPPLY |
|
| |
| USB |
|
|
| Battery | 3 x 1.5Volt Mignon (Type“AA”) | |
| Power connector | 2 mm DC jack, negative center | |
|
| 9V , 100 mA regulated |
|
|
| USA/Canada | 120V~, 60 Hz |
|
| China/Korea | 220V~, 50 Hz |
|
| UK/Australia | 230V~, 50 Hz |
|
| Europe | 230V~, 50 Hz |
|
| Japan | 100V~, 50 – 60 Hz |
| Power consumption | max. 0.9W |
|
DIMENSIONS/WEIGHT |
|
| |
| Dimensions (H xW x D) | approx. 8 15/32" x 3 26/32" x 19 15/32" | |
|
| (215 mm x 97 mm x 495 mm) | |
| Weight | approx. 4 30/32 lbs. (2.24 kg) | |
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or liiustrated.