30 / EN Washing Machine /User’s Manual
Operating the product
5. Make changes in auxiliary functions,
temperature and speed settings if necessary.
6. Press Start / Pause / Cancel button to start the
machine.
CThe loading door will not open if the
water temperature in the machine is
high or the water level is above the door
opening.
5.17 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
CYou can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function
buttons for 3 seconds. “Con” appears on the
display.
CSame phrase will appear on the display
if you press any button when Child Lock
is enabled.
To deactivate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function
buttons for 3 seconds. “COFF” appears on the
display.
CDo not forget to disable the child lock
at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.
5.18 Cancelling the programme
Press and hold Start / Pause / Cancel button
for 3 seconds. Start symbol flashes. Symbol of
the step at which the programme was cancelled
remains lit. "End" appears on the display and the
programme is cancelled.
CIf you want to open the loading door after
you have cancelled the programme but it
is not possible to open the loading door
since the water level in the machine is
above the loading door opening, then
turn the Programme Selection knob to
Pump+Spin programme and discharge
the water in the machine.
5.19 Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol illuminates
when the machine is in Rinse Hold mode.
If you want to spin your laundry when the machine
is in this mode:
Adjust the spin speed and press Start / Pause /
Cancel button. Pause symbol disappears and Start
symbol appears. Programme resumes, discharges
the water and spins the laundry.
If you only want to drain the water without
spinning:
Just press Start / Pause / Cancel button. Pause
symbol disappears. Start symbol appears.
Programme resumes and discharges the water
only.