IMPORTANT!
Before you begin
You will need:
•Belkin VoIP unit
•Power cable
•Network cable
Hardware check:
•Your computer is switched on
•The VoIP unit is switched on (power switch at rear)
•Network cable connected from computer to the VoIP unit
Self Help Guide
Restore your Belkin VoIP unit to the factory default settings
This process may take up to 1-2 minutes
Step 1 Open your web browser (Internet Explorer, Mozilla FireFox, Safari etc)
Step 2 In the Address Bar, delete any text and type in 10.1.1.1 or Click Here to open the page directly
| Step 3 | Type in your current password (default password = admin) |
|
| then click LOGIN |
| Step 4 | On the left hand side of the screen click Advanced Setup |
F1P1241EGau | Step 5 | You will now be presented with more options in the menu on the left. |
|
| Click Tools then choose Configuration Tools |
F1P1241ENau
Step 6 | Left click on Restore router to Factory Defaults and click Next |
Step 7 | Click Apply, the VoIP unit will now restore to factory defaults |
F1P1210ENau | and reboot. |
TSG | If you still require further assistance | Call: | 1300 554 780 |
Page 1 of 1 | contact Belkin Technical Support | Visit: | www.belkin.com/support |
|
|
|
|
