10.Use a coin to turn the screw clockwise until the lamp cover is secured.
•Loose screw may cause a bad connection, which could result in malfunction.
•Do not over tighten the screw.
11.Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12. After the startup logo, open the
SETUP: Advanced > Lamp Settings menu. Press Mode/enter on the projector or ENTER on the remote control. The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press Mode/enter on the projector or ENTER on the remote control. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
Reset Lamp Timer?
Reset Cancel
