Blaupunkt MP41 1. , 2. , 1. , 5. , 4. , 3. , Direct Access to Memorized Disc Names via Disc call, 2. 3.

ENGLISH
E-13
Erasing the CDC disc names
1. Press the
DISP
for more than 2 seconds during CD
changer mode.
2. Press the
MUTE / SENS
.
The disc name or “ _ _ _ _ _ _ _ ” is now flashing.
3. Rotate the dial to select the name that you want to erase.
To erase all the names, display “✳ALL DELETE✳ ”.
4. Press the
DISP
for more than 2 seconds.
Repeat steps 3. and 4. if you want to erase other names.
5. To return to the normal CD playback mode, Press
DISP
.
Direct Access to Memorized Disc Names via
Disc call
You can search for the memorized disc names in the memory.
1. Press the
DISP
to display the “DISC CALL” on the display
window.
2. Rotate the large dial to select the desired disc name.
3. Press the
MUTE / SENS
to start playback for the desired sta-
tion.
IDC A09 Changer:
The IDC A09 is a 5-disc CD Changer. When using the Folder
+ & – keys, it is possible to mistakenly ask the IDC A09 for a
CD Disc higher than the number 5 (Five).
When this command is manually done in error, the San jose’s
Display will read disc numbers above 5, but the unit will then
only play but a few seconds of the next disc, which would be
Disc 1, whereas the Display is reading disc number 6 (Six)
which does not exist. Choosing a vacant / empty IDC A09
disc slot will result in a “No Magazine” or a double dashes
(– –) message in the LCD.
Do one of the following remedies:
Manually select the desired disc at the Changer’s controls,
Or allow the IDC A09 to automatically cycle to the next disk
after the completion of Disc #5,
Or Press Folder + or – until Disc 1 (One) or the desired disc is
displayed in the receivers LCD.
San Jose MP41_body_en 8/28/01, 6:04 PM13