Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

Assembly Instructions

For Best Results:

Remove all contents from packaging and make sure all parts are present before attempting assembly. While assembling, tighten all bolt connections by hand first. Then, when the fireplace is fully assembled, go back and tighten with wrenches.

 

7

 

7

 

 

18

12

G

 

 

 

A

 

C

 

 

14

14

 

7

I16

8

F

15

D 11

Step 1

Attach two adjustable leg cups (14) to two leg extensions (18) using two adjustable leg-cup bolts (A). Insert leg extensions (18) into legs (7), assure the holes on the two legs are in line and attach legs together using front axle (12), wing nuts (C) and small washers (G), as shown. Make sure the rim of the cup faces downward when attached, and bottom of cup touches end of leg.

Step 2

Attach two wheel extensions (8) together using wheel axle (11), and attach wheels (15) to ends of axle using wheel standoffs (I), wheel washers (F), and wheel nuts (D), as shown. Install wheel decals (16) on wheels (15). Insert wheel extensions (8) into legs as shown.

Note: The end of wheel extension has a lock pin. Push pin down, then insert the wheel extension into leg and turn the wheel extension

to assure the pin insert into lock holes on leg.

17

Step 3

Attach first set of clips (17), to each of the four legs at the lowest horizontal marking, as shown. Assure that the clips are attached with the directional arrow facing upwards.

3

Owner’s manual and assembly instructions: model 252719 portable outdoor fireplace

4/02