Outdoor LP Gas Barbecue Grill Model No. HBT601B

Step

12

Step

13

Insert warming rack

Slide warming rack into holes in lid and bottom bowl.

Note: Look for corresponding holes on side of lid. Insert short wire ends into lid holes, one side at a time. Position warming rack legs into slots on grill body sides.

Install AAA battery and lighting rod placement

A. Install AAA battery (F) by unscrewing ignitor button. Insert battery into ignitor opening. Screw ignitor button onto grill body assembly.

B. Hook ring on lighting rod onto hook on side shelf.

Installing LP Gas Tank

This grill is designed to operate with a (DOT 39 Cylinder) one pound 7-3/8” high disposable

/16.4 oz. propane gas tank. DO NOT ATTEMPT TO REFILL ANY ONE POUND (16.4 oz.)

PROPANE GAS TANKS!

If you use a 20 lb. LP tank and hose adapter (sold separately), follow these connection and leak checking instructions in addition to the directions from the adapter hose manufacturer on every use.

Insert LP Gas Tank

Insert LP gas tank through LP tank support.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in the head of the gas tank, head of the regulator valve or in the head of the burner and burner ports.

Lubricate the threads of the regulator valve with petroleum jelly, insert the gas tank into the regulator valve and hand-tighten firmly.

Operating Instructions

Step

14

Completed

Congratulations your assembly is now complete. Read Operating Instructions before proceeding.

Checking for Leaks

Burner Connections

Make sure the regulator valve and hose connections are securely fastened to the burner and the tank.

If your unit was assembled for you, visually check the connection between the burner pipe and orifice. Make sure the burner pipe fits over the orifice.

Gas Valve with orifice

Burner

Venturi

WARNING: Failure to inspect this connection or follow these

instructions could cause a fire or an explosion which can cause death, serious bodily injury, or damage to property.

Please refer to diagram for proper installation.

If the burner pipe does not rest flush to the orifice, please contact 1.800.762.1142 for assistance.