Outdoor Charcoal Barbecue Grill Model No.
Assembly Instructions
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference.
For Easiest Assembly:
•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.
•Clear an area large enough to layout all components and hardware.
•When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware.
•Follow all steps in order to properly assemble your product.
Step Attach handle and air vent
1A. Attach handle to lid using 2 sets of heat resistant washers (G), large washers (F), large lock washers (J), and large wing nuts (D).
B.Attach air vent to lid using large screw (B), medium lock washer (I), and small wing nut (C).
Step Attach bottom slide
2A. Insert slide onto underside of bowl. Turn to lock into place.
B.Attach bottom slide to bottom bowl using large screw (B), large washer (F) medium lock washer (I), and small wing nut (C).
Note: bowl is shown upside down.
Step
3
Step
4
Attach legs and bottom plate
A. Attach 4 legs to bottom bowl using 4 sets of large screws (B), medium lock washers (I), and large washers (F).
Note: Do not fully tighten large screws (B) until bottom plate is assembled.
B. Attach bottom plate to legs using 4 sets of small screws (A), small lock washers
(H) and small washers (E).
C.Tighten all 4 large screws (B).
Attach handles
Attach handles and side handle supports to bottom bowl using 4 sets of large washers (F), large lock washers (J) and large wing nuts (D).