Custom Arming | Bosch Appliances DS7400XIV4-EXP manual

DS7400XiV4-EXP User Guide 6.0 Day to Day Operations

EN 10

6.1.4Custom Arming

Custom arming is used to arm zones that you specify and your installer programs into your system. An entry/exit delay is in effect unless otherwise programmed.

The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14).

Table 6: Custom Arming


Equipment	Command Sequence	What Happens	What To Do

Text Keypad LED	[PIN][#][4]	• The red Armed LED flashes.	Exit during the exit-delay
Keypad		• “On Partial” is displayed. *	period.
		• “Exit Now” is displayed during the exit-
		delay period. *
		• The green Status LED lights steady.
		• A single beep sounds.
		• The red Armed LED lights steady when
		the exit-delay period ends.
		• The zones that were programmed for
		custom arming are armed.
RF3341 Keypad	[PIN][#][4]	• The LED flashes indicating a signal was	Exit during the exit-delay
		sent to your security system.	period.
		• The zones programmed for custom
		arming are armed.
RF3332/RF3332E,		Not applicable
RF3334/RF3334E
* Text Keypad only

Bosch Security Systems 6/05 4998154961B

Image 10

Bosch Appliances DS7400XIV4-EXP manual Custom Arming

Contents

DS7400XiV4-EXP User Guide Contents Tips, Notes, Cautions, and Warnings System OverviewConventions Used in This Guide Typographical Conventions Your alarm system might be partitioned Understanding Areas Partitions Keypad LEDs Volume ControlUnderstanding the Text and LED Keypads Status LEDs General Information Understanding RF Keypad and KeyfobsOption and Emergency Keys Standard Operations Day to Day OperationsNormal Arming Perimeter Instant Arming Perimeter Arming PIN Custom Arming Maximum Security Arming Normal Disarming Quick Arming Optional OperationsForce Arming Zone Bypass Delaying Automatic Arming Automatic Arming Delayed Arming Automatic Disarming Access Control Chime ModeThis feature can be used in armed or disarmed modes Setting the System Clock Changing the Date Emergency Procedures No fire detection device or system is 100% foolproof Fire SafetyIf Installed in Family Residences Create and Practice an Escape Plan Emergency Keypad Alarms/ Silencing Alarms Installation Considerations Turning OFF Disarming Your System under Duress Disarming Your System under Duress Removing a PIN Personal Identification Numbers PINsChanging a PIN Changing the Expiration Date for Temporary PINs PIN Authority Levels Error Displays System Faults System Faults System Faults Zone Test Testing Your SystemTest the system weekly Zone Test Communicator Test Battery TestsCommunicator Test Fire Walk Test Fire Walk Test Event History Readback Event History ReadbackScrolling through the History Events Text Keypad Only Master Keypad Displays Master Keypad Text Keypad OnlyMaster Keypad LEDs Arming from the Master Keypad Single Partition ModeExample of Accessing Single Partition Mode Arming from the Master Keypad Disarming from the Master Keypad Disarming from the Master Keypad Glossary Quick Reference Guide DS7400XiV4-EXP User Guide Quick Reference Guide System Features Reference Guide DS7400XiV4-EXP User Guide Notes DS7400XiV4-EXP User Guide Notes Bosch Security Systems 4998154961B