English
38
Regular
Wash
Cancel Drain
Delicate
/Econo
Quick
Wash
Top Control
Note: Only Top Control Models with an LED
display have the Additional Drying Heat.
1. Open the dishwasher door far enough to
expose the control buttons.
2. Press and hold the left-most of the two
buttons labelled “Cancel Drain”, as shown in
Figure 31, then press and hold the On/Off
button. When the LED display shows a “0”
or a “1”, release both buttons. The light
above the left-most “Cancel Drain” button
will begin to flash.
3. Press the left-most “Cancel Drain” button,
as shown in Figure 31, until the LED display
shows a “1”, indicating that the Additional
Drying Heat is enabled.
4. If you wish to disable the Additional Drying
Heat, press the left-most “Cancel Drain”
button again. The LED display will show a
“0”, indicating that the Additional Drying Heat
is disabled.
5. Press the On/Off button. The light above
the left-most “Cancel Drain” button will stop
flashing. You may now wash dishes as
usual.
RACK ACCESSORIES
Many models of Siemens dishwashers have
various rack accessories that greatly
expand and enhance the dishwasher’s
capabilites. Not every model of Siemens
dishwasher will have every rack accessory.
Check the Model Features Chart in this
manual to find out which rack accessories
are on your dishwasher.

Flip Tines

Flip Tines fold down to make loading the
racks easier in some instances. Before you
attempt to fold down a set of tines, check
with the Model Features Chart on page 6
in this manual to to ensure that the rack is
equipped with Flip Tines.
To operate the Flip Tines, simply grasp the
tines and gently fold them downward.

Cup Shelves

Grasp the Cup Shelves, as shown in Figure
32, and fold them down. Place cups upside-
down on the cup shelves.
(Special Features, continued)
(Continued on Next Page)
Special Features | Caractéristiques Spéciales | Caractísticas Especiales
Figure 31/Ilus. 31Figure 30/Ilus. 30