4
65
4
TO REMOVE FRONT PANEL (continued):
•fCarefully loosen door seal clamping rings (outer/inner), taking care not to tear
seal. Loosen clamp and disconnect water fill tube from seal, then remove seal.
•gRemove two T-20 Torx front panel screws from bottom of front panel.
•hTo remove front panel, carefully pull bottom of panel out away from washer.
•iDisconnect door latch connector.
4 4
Disassembly Disassembly --
-- Drum (2), Front Panel
Drum (2), Front Panel
29
HINT:When removing door
seal, loosen clamp to water fill
tube and disconnect tube from
door seal.
5 7
1st Edition/Revision 5 (1/20/04)