Bosch Power Tools CRS180K, CRS180BL, CRS180BN manual Maintenance, Cleaning

Models: CRS180BN CRS180K CRS180BL CRS180B

1 32
Download 32 pages 33.4 Kb
Page 11
Image 11
! CAUTION
! WARNING
! WARNING

2610034440 03-14_CRS180 3/27/14 11:45 AM Page 11

Maintenance

Service

NO USER SERVICE-ABLE

PARTS INSIDE. Preventive maintenance performed by un au thorized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recom- mend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station. SERVICE MEN: Disconnect tool and/or charger from power source before servicing.

BATTERIES

Be alert for battery packs that are nearing their end of life. If you notice decreased tool performance or significantly shorter running time between charges then it is time to replace the battery pack. Failure to do so can cause the tool to operate improperly or damage the charger.

TOOL LUBRICATION

Your Bosch tool has been properly lubricated and is ready for use.

D.C. MOTORS

The motor in your tool has been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend it be examined every six months. Only a genuine Bosch replacement motor specially designed for your tool should be used.

BEARINGS

Bearings which become noisy (due to heavy load or very abrasive material cutting) should be replaced at once to avoid overheating and motor failure.

Cleaning

To avoid accidents, always disconnect the tool and/or charger from the power supply before

cleaning. The tool may be cleaned most effectively with com pressed dry air. Always wear safety goggles when cleaning tools with compressed air.

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to clean by inserting pointed objects through opening.

LockJawBLADE HOLDER MAINTENANCE Use dry compressed air to clean dust and debris from the LockJaw™ blade holder assembly on a regular basis.

Periodically lubricate LockJaw™ blade holder with a dry lubricant such as graphite.

Certain cleaning agents and solvents damage plastic parts. Some of these are: gasoline,

car bon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.

-11-

Page 11
Image 11
Bosch Power Tools CRS180K, CRS180BL, CRS180BN manual Maintenance, Cleaning