BM 2610014415 01-11 E:BM 2610012089 12-10 E 1/10/11 7:17 AM Page 21

NOTE: The spacing instructions are based on using the standard kerf blade supplied with your GTS1031. If a smaller or larger kerf blade is used, adjust the spacer. For instance, if the kerf of the replacement blade is larger, use 6 or more thick- nesses of paper and if it is smaller, use 4 or less thicknesses. Depending on the type of paper used as a spacer, you may need to modify the number of folds for proper alignment.

7.Insert folded paper 5 between Riving Knife 1 and Fence 3.

D.Slowly turn the Set Screw 7 while watching the Riving Knife tilt until it is in line with the blade.

E.Recheck squareness of riving knife to table by sliding fence against blade. Readjust if neces- sary.

8.After completing adjustments:

A.Lightly tighten hex nut 6 (hold set screw posi- tion with screwdriver while tightening nut).

B.Fully tighten Clamp Screws 8 with Allen wrench. Then fully tighten the hex nut.

A. Hold Riving Knife and paper firmly against

NOTE: Check that the riving knife stays in line with

Fence (Fig. 27 & 28).

blade when the blade is tilted at any angle. Replace

FIG. 27

5

the Barrier Guard Assembly and Anti-Kickback De-

vice before making cuts.

1

 

 

 

 

AdjUSTINg THE TAblE INSERT

8

 

The GTS1031 table insert slot includes four (4) ad-

 

justment screws 9 to set the height (Fig. 29). Place

 

7

the insert 10 onto the table 11. Place a straight edge

6

(such as the metal ruler from a combination square)

 

 

across the table top and insert top – the surfaces

8

 

3

should be at the same level. If adjustment is neces-

 

sary, use the included 2 mm “L wrench” (packed with

2

 

the table insert) to rotate each set screw up or down.

 

 

 

 

FIG. 29

 

 

10

FIG. 28

5

 

 

 

3

11

9

1

 

 

 

3

 

8

B.Lightly tighten the clamp screws 8.

C.Remove the paper - Slide fence away from blade.

-21-

Page 20 Page 22
Page 21
Image 21
Bosch Power Tools manual AdjUSTINg the TAblE Insert, GTS1031 table insert slot includes four 4 ad
Page 20 Page 22

GTS1031 specifications

The Bosch Power Tools GTS1031 is a compact job site table saw designed to deliver precision cutting in a portable format. This powerful saw is equipped with a robust 15-amp motor that can easily handle a wide variety of applications, making it an excellent choice for contractors and DIY enthusiasts alike.

One of the standout features of the GTS1031 is its Smart Guard System. This integrated safety feature includes a modular blade guard, riving knife, and anti-kickback pawls. The blade guard helps protect the user from accidental contact with the blade, while the riving knife reduces the risk of kickback during operation. The entire system is designed to be easy to install and adjust, promoting both safety and efficiency on the job.

The GTS1031 boasts a portable, lightweight design that weighs just 52 pounds. This makes it easy to transport, set up, and store. Its foldable stand provides a stable base while offering simple setup and breakdown without the need for additional tools. The compact size of the saw, along with its sturdy construction, makes it extremely convenient for use in tight spaces or on busy job sites.

Another notable characteristic of the GTS1031 is its cutting capacity. With a 10-inch blade, it can make cuts up to 26 inches wide with a depth of 3.5 inches at 90 degrees and 2.5 inches at 45 degrees. The precision machined aluminum table ensures accurate cuts and durability, while the integrated measurements allow for easy adjustments and repeatability.

The saw features an onboard storage system for its accessories, ensuring that everything needed for operation is within arm's reach. This organization helps users stay efficient, reducing downtime during projects. The table saw is also designed for easy blade changes, minimizing interruption and allowing users to switch between different types of blades based on their cutting needs.

With its blend of power, portability, and safety features, the Bosch Power Tools GTS1031 stands out as a reliable choice for both professionals and hobbyists. Its emphasis on precision and user-friendly design makes it an indispensable tool for a wide range of applications, from framing to fine woodworking.
Top Page Image Contents