BM 2610014415 01-11 E:BM 2610012089 12-10 E 1/10/11 7:17 AM Page 23

The Main Barrier Guard component can be quickly

FIG. 33

 

attached and detached through the use of a quick

 

 

release lever. The guard is attached by seating the

 

 

crossbar into the top of the Riving Knife and engag-

 

 

ing the locking lever. Following this process in re-

 

 

verse, the guard can be easily removed for special

 

 

operations such as dados or rabbets.

3

 

The Anti-Kickback Device can be easily attached by

 

 

 

aligning the attachment pin with the hole in the rear

 

 

of the riving knife. It can be easily removed by de-

 

 

pressing the compression pads on either side of the

 

 

Anti-Kickback Device and lifting it away.

 

1

The Riving Knife can be easily adjusted to one of

2

 

three heights by removing the table insert, raising

 

 

the blade to its full height and releasing the riving

 

 

knife release lever at the base of the Riving Knife.

 

 

The Riving Knife should be locked in its highest po-

 

 

sition for use with the Main Barrier Guard and Anti-

 

 

Kickback Device. It can be adjusted to its middle

 

FIG. 34

position for non-through cuts and for use as a mate-

 

 

 

rial splitter without the Main Barrier Guard and Anti-

 

 

Kickback Device.

 

 

In the event that the Riving Knife can not be used for a specific cut, it can be adjusted to its lowest po- sition, thus placing it 1” above the surface of the table (while the blade is at its full height).

SySTEM STORAgE

When not in use, the Main Barrier Guard and Anti- Kickback Device can be stored under the right side table extension.

Use of all the components of the ! WARNING Smart Guard System, including

Main Barrier Guard, Anti-Kickback Device, and Riving Knife is highly recommended to provide protection against accidents and injury.

1. Slide the front of the Main Barrier Guard assembly up and into the U-bracket at the front right side of the saw (Fig. 33).

2. Pivot the rear of the guard down and onto the mounting bracket.

3. Lock the Main Barrier Guard assembly into place in the same manner as you would attach it to the Riving Knife.

4. Locate the Anti-Kickback Device storage location just above the Dust Chute on the back of the tool. Attach the Anti-Kickback Device to the hanging bracket in the same manner that it attaches to the Riving Knife (Fig. 34).

-23-

Page 22 Page 24
Page 23
Image 23
Bosch Power Tools GTS1031 manual SySTEM STORAgE
Page 22 Page 24

GTS1031 specifications

The Bosch Power Tools GTS1031 is a compact job site table saw designed to deliver precision cutting in a portable format. This powerful saw is equipped with a robust 15-amp motor that can easily handle a wide variety of applications, making it an excellent choice for contractors and DIY enthusiasts alike.

One of the standout features of the GTS1031 is its Smart Guard System. This integrated safety feature includes a modular blade guard, riving knife, and anti-kickback pawls. The blade guard helps protect the user from accidental contact with the blade, while the riving knife reduces the risk of kickback during operation. The entire system is designed to be easy to install and adjust, promoting both safety and efficiency on the job.

The GTS1031 boasts a portable, lightweight design that weighs just 52 pounds. This makes it easy to transport, set up, and store. Its foldable stand provides a stable base while offering simple setup and breakdown without the need for additional tools. The compact size of the saw, along with its sturdy construction, makes it extremely convenient for use in tight spaces or on busy job sites.

Another notable characteristic of the GTS1031 is its cutting capacity. With a 10-inch blade, it can make cuts up to 26 inches wide with a depth of 3.5 inches at 90 degrees and 2.5 inches at 45 degrees. The precision machined aluminum table ensures accurate cuts and durability, while the integrated measurements allow for easy adjustments and repeatability.

The saw features an onboard storage system for its accessories, ensuring that everything needed for operation is within arm's reach. This organization helps users stay efficient, reducing downtime during projects. The table saw is also designed for easy blade changes, minimizing interruption and allowing users to switch between different types of blades based on their cutting needs.

With its blend of power, portability, and safety features, the Bosch Power Tools GTS1031 stands out as a reliable choice for both professionals and hobbyists. Its emphasis on precision and user-friendly design makes it an indispensable tool for a wide range of applications, from framing to fine woodworking.
Top Page Image Contents