20
English
7.0 Features
Features of the Bose
®
Model 1800-VI and 1600-VI
Professional Stereo Power Amplifiers
1800-VI amplifier 1600-VI amplifier
450 watts per channel into 8 ohms 240 watts per channel into 8 ohms
600 watts per channel into 4 ohms 325 watts per channel into 4 ohms
Two input connectors per channel allow 1/4" TRS, XLR, or quick connect terminal
block connection
Two input connectors for each channel are wired in parallel
Accepts balanced or unbalanced lines
Independent CH 1 and CH 2 Level controls with 11 detented positions
Level Control Defeat Switch
Dual Mono mode for operating both channels with a single mono input
Bridged Mono mode for combining the power of both channels into a single higher
powered channel
Sequencer connection for sequentially powering-up multiple amplifiers
Active equalization cards available for the Bose 402
®
, 502
®
A, 502B, and 802
®
, Model 8 and
Model 25/32 loudspeakers.
Bi-Amp/Full Range configurable
Internally configurable for Parallel Mono mode for single channel low impedance operation
Internally configurable for 0.775V or 1.5V
rms
input sensitivity
Internally configurable input polarity
Class H dual-rail power supply
Independent CH 1/CH 2 speaker relays will instantly disconnect if one of the following fault
conditions is detected: D.C. offset, over temperature, short circuit
Additional protection circuitry includes Clipping Eliminator, AC Line Fuse
Power Connected/Standby indicator
7 LED display per channel, including Power Ready and Clip/Protect indicators
2-speed fan cooled