9
The massaging rollers A should always
be kept in contact with the skin,
allowing the pulsating movements to
stimulate and relax the skin for a gentler
epilation.
If you are used to epilation and look
for a faster way to efficiently remove
hair, attach the EfficiencyPro clip a.
It allows maximum skin contact and
ensures an optimum usage position.
3Leg epilation
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4Underarm and bikini line epilation
For this specific application, the narrow
epilation head 8 has been developed.
Thanks to its specific design adapted
to the contours of these areas, it pro-
vides a gentle and thorough epilation.
Please be aware that especially at the
beginning these areas are particularly
sensitive. With repeated usage the pain
sensation will diminish. For more
comfort, ensure that the hair is at the
optimum length of 2–5 mm.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up so that the skin
is stretched and guide the appliance in
different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
substances such as deodorants with
alcohol.
5Facial epilation
With the precision head 9 attached,
your Silk·épil is perfectly suited for
conveniently removing any unwanted
hair from the face or other sensitive
areas.
Prior to epilation, we recommend
cleaning the skin with alcohol to
promote good hygiene.
Please use the included cleansing
wipes j to wipe over the area you
want to epilate.
When epilating the face, stretch the
skin with one hand, hold the epilator in
a 90° angle with your other hand and
guide it slowly in the direction of the
switch.
Warning:
Facial cleansing wipes are for
single external use only. Do not use in or
near the eyes. Keep out of reach of
children. If inflammation develops,
discontinue use. Flammable, keep away
from fire or flame.
Ingredients: Isopropyl alcohol, aqua.
Cleaning the epilation heads
6 After epilating, unplug the appliance
and clean the epilation head. First
remove the clip used (A or a) and
clean it with the brush.
7 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
Clean the tweezers with the brush from
the rear side of the epilator head while
turning the barrel manually.
8 Remove the epilation head by pressing
the release buttons 3 on the left and
right and pull it off. Give the top of the
housing a quick clean with the brush.
Place the epilation head and your
preferred clip back on the housing.
Subject to change without notice.
This product conforms to the
European Directives EMC 89/336/
EEC and Low Voltage 73/23/EEC.
Please do not dispose of the
product in the household waste at
the end of its useful life. Disposal
can take place at a Braun Service
Centre or at appropriate collection
points provided in your country.
5396374_SE5685_S6_76 Seite 9 Dienstag, 12. September 2006 1:34 13