Whisks N/O
For mixing cake mixtures, sponges and mashed potatoes.
For whipping cream (minimum 100 ml cream), eggwhites (minimum 1 eggwhite), and creamy ingredients.
Generally all speed settings may be used. The speed settings are recommended as follows:
Switch position 1:
•For carefully adding whipped eggwhites or other foamy ingredients.
•Adding flour to foamy substances, without flattening them (e. g. sponges).
•Smoothly adding flour, cacao etc. without blowing them around.
•Mashing of boiled potatoes for mashed potatoes.
Switch position 2:
•Initial and final speed when whipping larger quantities of cream.
•Whipping of smaller quantities of cream.
•Adding of liquids to processed goods (little splashing of the liquids, e. g. mashed potatoes).
Switch position 3:
•Whipping of cream, eggwhites, sponges and other foamy goods, e. g. desserts.
•Mixing of creamy goods and mixtures.
Tips:
–To obtain optimum results when making cake mixtures, etc. all ingredients should have the same temperature. Butter, eggs, etc. should be removed from the refrigerator some time before they are being used.
–Whipped cream has more volume, if the cream is well chilled before being whipped.
–Mashed potatoes will become more creamy, if all ingredients are being used as hot as possible (e. g. potatoes immediately after boiling).
Handblender attachment
(With the models M 820, M 830, M 870, M 880 and M 880 M)
To insert the handblender attachment P into the motor part, slide back the cover of the opening for the handblender attachment % (d) and insert the hand- blender attachment into the opening so that the marking on the handblender attachment aligns with the marking on the motor part (e). Then turn the handblender 90° clockwise (e), until it locks. To remove the handblender attachment, turn it 90°
Important: The handblender attachment may only be immersed to the mark (f).
The handblender attachment blends and mixes fast and easily. Use it to make sauces, soups, mayonnaise, dietary and baby food.
Important: The handblender attachment can be operated only in the «pulse» mode (switch position «P» – see section «Switch »). When the handblender attachment is inserted into the motor part, the switch positions 1, 2 and 3 do not function for safety reasons.
The handblender attachment can be used in the practical mixing/measuring beaker, but you can operate the Braun hand- blender attachment just as well in any bowl, pan or other container too.
Should you want to blend directly in the saucepan while cooking, take the pan from the stove first and allow to cool to protect your handblender attachment from overheating. Never use your handblender attachment in very hot or boiling in- gredients. To avoid splashing, insert the handblender attachment into the vessel first, and then switch the appliance on.
Keep the switch pressed down as long as you operate your handblender attachment. Turn appliance off first by releasing the switch when you are finished.
Important: The mixing/measuring beaker may be used only with the handblender attachment for processing smaller quantities. It should not be used with a whisk. Do not place the mixing/measuring beaker into a microwave oven.
Chopper attachment
(With the models M 870, M 880 and M 880 M only)
Maximum capacity: 250 g of meat
Assembling and operating
•Pull off the plastic blade cover from the blade insert.
Caution: Blades are sharp!
Always hold by the upper plastic part.
•Place the double function base/lid on the bottom of the chopper bowl.
•Place the blade insert on the centre pin of the chopper bowl (h).
•Place the food into the chopper bowl.
•Set the upper part on the chopper bowl (i).
•Safety look: The chopper will not work if the upper part is not fitted properly.
•Connect the chopper attachment with the motor part by inserting the two pins on the upper part into the two corre- sponding openings on the bottom of the motor part, until the upper part locks into place (j).
•Use the «pulse» mode (switch position «P») for brief and fast processing whereas the switch position «3» should be used for fine grating.
Always hold the motor part with your hand and do not allow the appliance to operate unsupervised.
Food preparation and chopping
•Do not chop ice cubes or extremely hard food, such as nutmeg, chocolate and coffee beans.
•When chopping meat, ensure that all bones, tendons and gristles are removed.
•Besides meat, the chopper attachment can also be used, e. g. for cheese, onions, parsley, dried fruits, tomatoes, carrots, apples etc.
•When chopping cooked food, allow it to cool off for a few minutes before putting it into the chopper bowl.
•The double function base/lid also serves as
6 | 7 |
