Engine Will Not Start

The Engine Cranks But Has No Spark

If the engine cranks but has no spark, it could be the micro switch (A, Figure 43).

3.Turn the microswitch on and test between the terminal (A, Figure 45) and ground.

 

 

 

 

A

A

 

 

 

Figure 45

 

 

 

 

Figure 43

 

 

 

• When the switch is in the ON position, no continuity

 

 

 

 

 

 

 

 

should be measured.

 

 

 

Reproduction

Test the continuity of the microswitch as follows:

• When the switch is in the OFF position, continuity

1. Remove the control panel.

 

 

should be measured.

2. Disconnect the 10-pin connector (Figure 44) that is

 

connected to the ignition module (module with three LED

4. If there is no on inuity at the 10-pin connector, test

lights).

Not

 

 

 

 

 

at the swit h. If the microswitch is pressed down

 

 

 

 

(Fig re 46) there should be continuity. If not, replace the

 

 

 

 

switch.

 

 

for

 

Figure 44

 

 

 

 

Figure 46

Spark Plug

See Engine Maintenance.

25