Regular Maintenance

Figure 24. Deck Lubrication

Figure 28. PTO Drive Idler Arm

 

Reproduction

Figure 25. Pump Drive Idler Arm

Not

for

 

 

Figure 29. Suspension Pivots

 

 

L

bricating the Drive Shaft

 

 

Maintenance Interval: Every 250 hours.

 

 

1.

Position the drive shaft so that the plug (A, Figure

 

 

 

30) can be accessed from beneath the machine

 

 

 

through the hole in the engine cradle.

 

 

2.

Remove the plug and install a 1/4-28 grease

Figure 26. Control Handle Pivots & S at Plate Pivots

fitting.

Grease the drive shaft.

 

 

3.

 

 

4.

Remove the 1/4-28 grease fitting and reinstall the

 

 

 

plug.

 

 

Lubricating the Front Casters

 

 

Maintenance Interval: Annually.

 

 

1.

Remove the 1/4-28 bolt (A, Figure 31) screwed

 

 

 

into the caster and install a 1/4-28 grease fitting.

 

 

2.

Grease the front caster

 

 

3.

Remove the 1/4-28 grease fitting and reinstall the

 

 

 

1/4-28 bolt

 

 

4.

Repeat the process for the other side of the

 

 

 

machine.

Figure 27. Deck Lift Linkage Pivots

 

 

 

34

www.SnapperPro.com