3
1 800 225 5712
1
14
13
12
13
14
4
4
30
5
3
20
35

BEFORE YOU BEGIN

IMPORTANT NOTES:
• Your table will be assembled upside down at first. FOR YOUR SAFETY and to avoid damaging the table, please do NOT flip the
table over onto its legs unless YOU HAVE HELP FROM OTHERS.
• To protect the surfaces of the table during assembly, find a clean, level place to work on. Using the box for this works well.
• Once the table is assembled, never lift or move it by the rods; this will damage the table.
ASSEMBLY TIPS:
• When assembling parts that have more than one bolt, start all the bolts by hand for that particular step BEFORE you tighten
them down.
• Keep the hardware pieces in their respective compartments during assembly so they are easily accessible.

STEP 1

ROD ASSEMBLY
The (R14) LONG PLAYER ROD anS (R12) MEDIUM PLAYER ROD
are verV cXose in XenZth. PXease make note \hich one is XonZer.
A) The (#14) LONG PLAYER RODS are for the hWINGi positions;
(#12) MEDIUM PLAYER RODS are for the hCENTERi positions;
(#13) SHORT PLAYER RODS are for the hDEFENSEi positions.
B) After you have placed the rods in their respective positions,
attach the (#3) HANDLES and (#5) SPRINGS using (#4) BOLTS
and (#30) SPIKE NUTS as shown.
ASSEMBLY INSTRUCTIONS

MODEL: X6855

FIGURE 1

TOOLS NEEDED:

•
Phillips head screwdriver
• Wrench (included)
• An electric screwdriver is very helpful in assembly. However, be sure to
SET AT LOW TORQUE and USE EXTREME CAUTION; you can over-tighten
the hardware and strip the screws, or make them poke through the table’s
parts!
*