Attach SMA adapter from the long range antenna cable to the adapter on the bridge/router
unit via the antenna connector on the rear of the unit. Hand tighten only. Attach the coaxial
seal around all RF connectors and then seal with silicone or a superior grade of electrical
tape.
3: Attaching the Ethernet Cable to the Bridge
Feed one end of the ethernet cable through each of the plastic and rubber grommets. Each
grommet fits inside the next and should be closed completely as seen in the image below
a) Plug Ethernet cables into the PoE adapter. Your Crossover cable (the cable with
mismatched heads) should connect your computer to the PoE adapter, and the
Straighthrough cable (the cable with matching heads) should connect the PoE adapter to
the bridge.