Setting Up the Machine
12

3 Printing a test page

Improper Setup
DO NOT connect the interface cable yet.
1Make sure that the printer power switch is off.
Connect the AC power cord to the printer.
2Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
3Unfold support flap 1.
4After the printer has finished warming up, the
Ready LED / Go button (1) stops blinking and
stays blue.
5Press the Go button. The printer prints a test
page. Check that the test page has printed
correctly.
Note
This function will not be available after the first
print job you send from your computer.
1