4
Setting Up the Machine
1Remove the protective tape.
1Connect the curled handse t cord to the
handset.
1Pull the paper tray complet ely out of the
machine and remove the outpu t paper tray.
2Press and slide the paper guide to fit the
paper width.
3Pull out the paper support an d unfold the
paper support flap.
4Fan the stack of paper well to av oid paper
jams and mis-feeds.
5Gently insert the paper in to the paper tray
print side down and top edge first.
Check that the paper is fla t in the tray and
below the maximum paper mark.
6Put the output paper tray back on and push
the paper tray firmly back into the machine.
1Removing the Protective Parts2Installing the Handset3Loading Paper
You can load up to 100 sheets of 20 lb paper.
For more details, see “About paper” in
Chapter 1 of the User’s Guide.
Paper Side Guide
Use the paper support flap for Letter, Legal
and A4 size paper.
■Make sure the paper side guides touch
the side of the paper.
■Be careful that you do not push the paper
in too far; it may lift at th e back of the tray
and cause paper feed problems.
Paper Support Flap
Paper Support