LABEL PRINTING

Label Preview

Using the Preview function you can check the layout of the label before printing.

1Press the Preview key.

An image of the label is displayed on the screen.

The length of the label is shown in the lower-right corner of the screen.

Press the or key to scroll the preview to the left or right. Press the or key to change the magnification of the preview.

•

Press the Escape, OK or Enter key to return to the text entry screen.

 

• To scroll the preview to the left or right end, hold down the Shift key and press the

or

 

key.

 

•To print the label directly from the preview screen, press the Print key or open the print options screen and select a print option. Refer to "Printing a Label" below for details.

•The print preview is a generated image of the label, and may differ from the actual label when printed.

PRINTING LABEL z

Printing a Label

Labels can be printed once text entry and formatting is complete. Printing options include single and multiple copies, sequential numbering and mirror-printing.

•Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape.

•Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the

tape to jam.

1

• Be sure to check that there is enough tape remaining when printing several labels

2

continuously. If tape is running low, set fewer copies, print labels one at a time, or replace the

tape cassette.

3

• Striped tape indicates the end of the tape cassette. If this appears during

printing, press the Power key to turn the P-touch off. Attempting to

4

print with an empty tape cassette may damage the machine.

 

5

6

7

8

9

Label Preview 53