Wireless Network

Windows®

 

 

j If the machine is configured for your network, choose the machine from the list, and then click Next.

Note

•You can find your machine’s IP address and the node name by printing out the Network Configuration List. See Print the Network Configuration List on page 45.

•If your wireless settings fail, an error message will appear during the installation of MFL-Pro Suite and the installation will be terminated.

Confirm your network setting by following the

on-screen instruction. If you encounter this failure, please go to step 17 on page 32 and setup the wireless connection again.

•If you are using WEP and the LCD displayed ‘Connected’ but your machine is not found, make sure you entered the WEP key correctly. The WEP key is case sensitive.

•If the machine is not yet configured for use on your network, the following screen appears.

Click OK and then Configure IP Address. Enter an IP address for your machine that is suitable for your network by following the on- screen instructions.

k If you do not want to monitor the machine status and error notifications from your computer, uncheck Enable Status Monitor and then click Next.

l The installation of the Brother drivers will automatically start. The installation screens appear one after another.

IMPORTANT

DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

Note

For Windows Vista®, when this screen appears, click the check box and click Install to complete the installation correctly.

m When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window.

Then click Next.

Wireless

Windows

®

Network

Macintosh

 

®

 

 

39