Note
If you are sharing one telephone line with an external telephone, connect it as shown below.
Before you connect the external telephone, remove the protective cap a from the EXT. jack on the machine.
1
2
1
(Example for Australia)
1Extension telephone
2External telephone
Note
If you are sharing one telephone line with an external telephone answering machine, connect it as shown below.
Before you connect the external telephone answering machine, remove the protective cap a from the EXT. jack on the machine.
1
(Example for Australia)
Set the receive mode to External TAD if you have an external answering machine. See Choose a Receive Mode on page 8. For additional details, see Connecting an external TAD (telephone answering device) in Chapter 7 of the User’s Guide.
Set your country (for
6 Australia/New Zealand customer only)
You must set your country so that the machine works correctly on local telecommunication lines in each country.
a Check that the power is turned on by plugging in the power cord and turn the power switch on.
b Press 
or 
to choose the country (Australia or New Zealand).
Set Country
aAustralia
bNew Zealand
Select ab or OK
Press OK when the LCD shows your country.
c The LCD prompts you to make sure of the country again.
Set Country
Australia
1.Yes
2.No
Enter Number
d If the LCD shows the correct country, press 1 to go to Step e.
Press 2 to go back to Step b to choose the country again.
e After the LCD shows Accepted, the machine will restart automatically. After the restart, the LCD shows Please Wait.
Note
If Scanner Locked appears on the LCD, immediately release the scanner lock and press Stop/Exit. (See Release the scanner
7