Wireless Network

Macintosh

 

 

Install the Printer Driver for Macintosh

10 Before you install

a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.

IMPORTANT

For Mac OS X 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. (For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/.)

Note

If you want to setup the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and click Downloads on your model page to download the driver and visit FAQ's for installation instructions.

11 Install the printer driver

a Put the installation CD-ROM into your CD-ROM drive.

b Double-click the Start Here OSX icon. Follow the on-screen instructions.

c Choose Wireless Network Connection.

IMPORTANT

DO NOT cancel any of the screens during the installation.

Note

It may take a few minutes for installation to complete.

d Choose your machine from the list, and then click OK.

Note

•If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name.

•You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 25.

e When this screen appears, click Next.

Note

When the Brother Support screen appears, make your selection and follow the on-screen instructions.

Finish

The installation is now

complete.

Note

If you use a specified IP Address for the machine, you must set the Boot Method to Static by using the control panel. For more information, see Network menu in the Network User's Guide.

24