13 13For DOS Users

(For FAX-5750e Only)

How to Use the Brother machine with Your DOS Application Software

Before working with your application software that runs on DOS, check that the Brother machine’s name appears in the printer selection of your application software. If the machine is not listed, you must install the printer driver that corresponds to HP LaserJet’s emulations.

The following table shows combinations of printer drivers and emulation mode. To get the most out of this machine, you should install an HP printer driver in your application software.

Printer driver supported in

Emulation mode to be selected with the remote

your application software

printer console program

 

 

HP LaserJet 5P

HP LaserJet 5P’s emulation mode

The best or recommended printer driver is indicated in bold.Be sure to choose the proper printer driver in your application software.

Be sure the printing resolution is set to 600 dpi in your DOS application software.

What Does the Remote Printer Console Do?

The Remote Printer Console (RPC) is a utility program that can run in the DOS environment and comprises the following program:

Remote Printer Console Main Program

This program allows you to change various printer settings such as emulation, print quality, fonts and page setup from your computer screen. Since most DOS applications have a Printer Settings menu that overrides the settings made by the RPC, you may not have to use this utility program. This utility program is useful for application software that does not control the printer’s settings and features.

13 - 1 F O R D O S U S E R S ( F O R F A X - 5 7 5 0 E O N L Y )