Brother 4750e, FAX-5750e Remote Commands, Remote Commands, Operation Details

Remote Commands

Follow the commands below to access features remotely. When you call your machine and enter your Remote Retrieval Access Code (1 5 9 ), the system will signal you with two short beeps to enter a remote command.

	Remote Commands			Operation Details
95		Changing Fax
		Forwarding
		/Paging setting
		1	OFF	If you hear one long beep, the change is accepted. If you
				hear three short beeps, you cannot change it because the
		2	Fax Forwarding
				conditions have not been met. (Example: registering
		3	Paging
				paging number). You can register your fax forwarding
		4	FAX FWD No.	number by using 4. FAX FWD NO (See Page 9-6). Once
				you have registered the number, your machine will
		6	Fax Storage ON
				change automatically to FAX FWD:ON mode.
		7	Fax Storage OFF	You can set FAX STORAGE to ON or OFF.
96		Retrieve a fax
		2	Retrieve all faxes	Enter the number of a remote fax machine to receive
				stored fax message(s). (See Page 9-6.)
		3	Erase fax from the	If you hear one long beep, you can erase fax message(s)
			memory	from the memory.
97		Check the Receiving
		Status
		1	Fax	You can check whether your machine has received any
				fax message(s). If yes, you will hear one long beep. If no,
				you will hear three short beeps.
98		Change Receive Mode
		1	TAD	If you hear one long beep, you can change the Answer
				Mode.
		2	FAX/TEL
				If you hear three short beeps, you cannot change it.
		3	FAX
90		Exit		After a long beep, you can exit remote retrieval.

9 - 5 R E M O T E F A X O P T I O N S