Press down
Pedal
| Controller | Bobbin Winding Clutch | |
� Place the thread end so that it does | � Pressing down on the controller | ||
| |||
not protrude from the bobbin. | harder increases the winding speed. |
|
7 While holding the end of the thread, step on the foot controller for a few seconds. Once enough thread has wound itself around the bobbin
to hold itself in place, release the foot controller and trim the excess thread.
A Cut thread and remove bobbin.
8 Start winding the bobbin again by pressing down on the foot controller.
9 Stop winding process when bobbin is full. Take the foot off foot controller.
0 Manually move bobbin winding clutch back to original position.
12