Fabric Separator (for joining lining to fabric)

✽✽ Use this technique for sewing velvet and lining together.

1 Raise needle and foot.

2 Move separator so it sits under presser foot.

3 Make sure it is lined up so that the needle passes through the slot of the separator without hitting the plate itself.

4 Secure liner plate in place with lining plate screws.

5 Set pressure of sewing feet and feed position to pin feeding position.

6 Pull thread until lower needle catches fabric.

✽✽ Sew 2-3 reinforcement stitches.

7 When not using separator, it can be swung off to the side as illustrated in drawing.

Needle

Separator

Fabric

Separator

Needle

Lining

Separator

Velvets

Seam Guide

1 Tighten the screw securely with a screwdriver since it might otherwise loosen due to vibration.

a

Installation

Turn adjustment screws as arrows images suggest to set the position of the Seam Guide foot.

Adjustment

Note

•Lighten the presser foot pressure slightly when using the fabric separator.

•Use the separator to neatly sew 2 layers of hard to manage fabrics together by keeping them from interacting with one and other before the needle sews them together in a perfect seam.

23