Setting Up the Machine
9

6 Print quality check

1After the cleaning cycle is finished, the LCD
shows:

Set Paper and

q

Press Start

2Make sure paper is loaded in the paper tray.
Press Colour Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3Check the quality of the four colour blocks on
the sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the paper
immediately after printing, the surface may not
be completely dry and may stain your fingers.
4The LCD shows:

Is Quality OK?

q
aYes bNo
5Do one of the following:
If all lines are clear and visible, press
a(Yes) to finish the quality check.
If you can see missing short lines, press
b(No) and go to step 6.
6The LCD asks you if the print quality is OK for
black and colour. Press a (Yes) or b (No) .

Black OK?

q
aYes bNo

Color OK?

q
aYes bNo
After pressing a (Yes) or b (No) for both black
and colour, the LCD shows:

Start Cleaning?

q
aYes bNo
7Press a (Yes), the machine will then start
cleaning the colours.
8After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
OK Poor