Reconnect any additional interface cables that you removed.

8

9 Reconnect the power cable and then turn on the DCP power switch.

■To check that you have installed the DIMM correctly, print the printer settings by using the selection in the driver and check the printout to make sure it shows the additional memory.

■You can check the current memory size in the user settings list. (See the NC-9100h Network User’s Guide on the CD-ROM.)

WARNING

If the Status LED turns Red for a Service Error, please coll Brother Custome Service at: 1-800-284-4329 (in USA), 1-877-BROTHER (in Canada) or (514) 685-6464 (in Montreal).

OPTIONAL ACCESSORIES 15 - 4