Appendix (for Europe and Other Countri es)
192
B
IMPORTANT - for your safety B
To ensure safe operation, the supplied three-pin plug must be inserted only into a standard three-pin power
outlet that is properly grounded through the standard electrical wiring.
Extension cords used with this printer must be three-pin plug type an d correctly wired to provide grounding.
Incorrectly wired extension cords may cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the
installation is completely safe. For your safety, if in any doubt about the effective groundi ng of the power, call
a qualified electrician.
This product should be connected to an AC power source within the range indi cated on the rating label. DO
NOT connect it to a DC power source. If you are n ot sure, contact a qualified electrician.
Disconnect device B
You must install this printer near a power outlet that is easily accessibl e. In case of an emergency, y ou must
disconnect the power cord from the power outlet to shut off the power completel y.
Caution for LAN connection B
Connect this product to a LAN connection that is not subjected to over voltages.
IT power system (For Norway only) B
This product is also designed for an IT power system with pha se-to-phase voltage 230V.
Wiring information (for UK) B
Important B
If you need to replace the plug fuse, fit a fuse that is approved b y ASTA to BS1362 with the same rating as
the original fuse.
Always replace the fuse cover. Never use a plug that do es not have a cover.
Warning - This printer must be earthed. B
The wires in the mains lead are coloured in line with the followin g code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
If in any doubt, call a qualified electrician.
Maschinenlärminformations- Verordnung 3. GPSGV (For Germany only) B
Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß EN ISO 7779.