Driver and Software
43
3
Job Spooling
The printer keeps the print j ob sent to it in memory.
You can reprint a document without sending the data aga in from your computer (except for secure
printing):
• Last Job Reprint: Reprints the last job
• Secure Print: Secure documents are do cuments that are password protected when the y are sent to the
machine. Only the people who know the password will be able to print them. Since the documents are
secured at the machine, you must enter the password using the control panel of the machine to print
them.
If you want to create a secure print job, check the Use Reprint box and then check the Secure Print
box. Enter a password in the password box and click OK.
(For more information about the Reprint function, see Reprinting documents on page 74.)
Note
If you want to prevent other people from printing y our data using the reprint function, uncheck the
Use Reprint check box in the job spooling settings.
TonerSave Mode
You can conserve toner using this feature . When you set Toner Save Mode to On, print appears lighter.
The default setting is Off.
Note
We do not recommend Toner Save Mode for printing photo or gray scale images.
Quick Print Setup
This feature allows you to quickly choose d river settings by clicking a tasktray icon.
You can turn the quick print setting on or off. By placing a check in the selection boxes for the following
functions you can choose which will be available in the quick print setting.
• Multip le Page
• Manual Duplex (HL-4040CN only)
• Dupl ex (HL-4040CDN / HL-4050CDN / HL-4070CDW only)
• Toner Save Mode
• Pap er Source
• Med ia Type
• Color/Mono
Sleep Time
When the printer does not receive data for a certain period of time, it enters slee p mode. In sleep mode,
the printer acts as though it were turned off. When you choo se PrinterDefault the timeout setting will be
5 minutes. Intelligent Sleep M ode automatically adjusts to the most suitable timeou t setting depending on
the frequency of your printer use. While the prin ter is in sleep mode, all the LEDs are off, but the printer
can still receive data. Receiving a print file or document or pressin g Go will automatically wake up the
printer to start printing.