Options
94
5
Installing extra memory 5
Note
Always turn off the printer power switch before installing or re moving the SO-DIMM.
aTurn off the printer power switch, and then unplug the printer. Discon nect the interface cable from the
printer.
bRemove the two SO-DIMM covers (both the pla stic one (1) and the metal one (2)).
cUnpack the SO-DIMM and hold it by its edges.
CAUTION
To prevent damage to the printer from static electricity, DO NOT tou ch the memory chips or the board
surface.
dHold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot.
Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).
2
1
12