Routine Ma intena nce
111
6
Belt unit 6
Order No. BU-100CL
Change Belt Unit message 6
When the belt unit runs out, the following message appears on the LC D. When you see this message, you
must replace the belt unit:
Change Belt Unit
CAUTION
DO NOT touch the surface of the belt unit. If you touch it, it could degr ade print quality.
Damage caused by incorrect handling of the b elt unit may void your warranty.
Replacing the belt unit 6
aTurn off the printer power switch. Press the front cover release button and then op en the front cover.
bHold the green handle of the drum unit. Lift the drum unit up an d then pull it out until it stops.