Appendix
182
A
Quick reference for bar code control commands A
The printer can print bar codes in the HP LaserJet emulatio n modes.
Print bar codes or expanded characters A
Format: ESC i n ... n \
Creates bar codes or expanded characters accor ding to the segment of parameters ‘n ... n’. For more
information about parameters, see the foll owing Definition of Parameters. This command m ust end with the
‘ \ ’ code (5CH).
Definition of parameters A
This bar code command can have the following parameters in th e parameter segment (n ... n). A s parameters
are effective within the single command sy ntax ESC i n ... n \, they do no t apply in the bar code commands.
If certain parameters are not given, they take the pr eset settings. The last parameter must be the bar code
data start (‘b’ or ‘B’) or the expanded character data start (‘l’ o r ‘L’). Other parameters can be given in any
sequence. Each parameter can start with a lo wer-case or upper-case character, for examp le, ‘t0’ or ‘T0’, ‘s3’
or ‘S3’ and so one.
Bar code mode A
Code ESC i
Dec 27 105
Hex 1B 69
n = ‘t0’ or ‘T0’ CODE 39 (default)
n = ‘t1’ or ‘T1’ Interleaved 2 of 5
n = ‘t3’ or ‘T3’ FIM (US-Post Net)
n = ‘t4’ or ‘T4’ Post Net (US-Post Net)
n = ‘t5’ or ‘T5’ EAN 8, EAN 13, or UPC A
n = ‘t6’ or ‘T6’ UPC E
n = ‘t9’ or ‘T9’ Codabar
n = ‘t12’ or ‘T12’ Code 128 set A
n = ‘t13’ or ‘T13’ Code 128 set B
n = ‘t14’ or ‘T14’ Code 128 set C
n = ‘t130’ or ‘T130’ ISBN (EAN)
n = ‘t131’ or ‘T131’ ISBN (UPC-E)
n = ‘t132’ or ‘T132’ EAN 128 set A
n = ‘t133’ or ‘T133’ EAN 128 set B
n = ‘t134’ or ‘T134’ EAN 128 set C